SLy Angle Miter Gauge
Description
My own version of an Angle Miter Gauge Customisable to your rail dimensions. Customisable arm lengths. Half degree precision marks. Feedback appreciated ;) Let me know if you need other rail shapes or other features... How to print: - Slicer settings "Horizontal Expansion" needs to be calibrated as there is no tolerance in my dimensions. Make sure a cylinder of 20mm will fit into a 20mm hole. Tight but not too much friction. As a reference, I use -0.07mm for my Ender 5 printing PETG. (Horizontal Expansion Calibration Tool: https://www.thingiverse.com/thing:4905876/files) - No print support needed as it is already included in the STL. - Slice and print AngleMiterGaugeKnob.stl - Generate the lower part using OpenSCAD: - Edit AngleMiterGaugeLower.scad for your own dimensions. - Render. - Export as STL. - Slice and print. - Generate the upper part using the same procedure. - Make sure the pin of the upper part goes fully inside the lower part hole. - If not, do the following until fully in: - Make rapid twisting movements keeping some pressure on the parts. - Manually sand both parts. - Assemble using an M6 hex bolt placing a large washer just below the knob.
Statistics
Likes
84
Downloads
0