Hard Drive Grommets for HP Elitedesk 800 SFF
Description
These are grommets to mount the hard drives in the HP Elitedesk 800 SFF. They likely fit other models as well. I made these grommets to mount hard drives for my friend. He was nice enough to want them shared with you guys. Hopefully they help some people. Included are grommets for the 2.5 inch as well as the 3.5 inch drives. For the 3.5 inch he used 6-32 screws that have a head of 6.4mm and a thread size of 3.4mm. I made the holes 6.6mm and 3.6mm respectively to allow for some extra clearance. He specifically stated that NOT ALL SCREWS WILL FIT. Some have larger heads and the design these have to be does not allow for a larger hole. Make sure you have the right screws. For the 2.5 inch drives he used M3X6 screws and all his heads fit but here's the sizing just to make sure yours will too: The inset into the grommet is 6mm diameter and the screw hole is 3.3mm diameter.
Statistics
Likes
11
Downloads
0