Rohde & Schwarz AMU/UPV/SMJ Compatible bottom feet + grip
Description
Bottom feet that are compatible with the Rohde & Schwarz AMU Baseband Generator, UPV Audio Analyzer, SMJ RF Generator, and likely many other similar vintage (early 2000s to now) R&S gear. The foot attaches with a M4x16 bolt into threaded inserts in the chassis, and this bolt is held captive by the flexible grip that attaches to the body of the foot (just like the original R&S design). The slightly raised parts of the chassis metal should align with the round holes on the left and right side. This part will also accommodate the original 3mm wire kickstands that front feet for these instruments use and has some detent to hold them in the out position. The second picture is a comparison between two original R&S parts on the left and two printed feet on the right. Version 1.1 Update: Added a thinner version of the rubber piece for the foot - after changing filaments and setup, it was harder to lock in than I wanted, so if you're having trouble getting the rubber part to fit, the "thin" version has more of a taper in the locking end to ease assembly.
Statistics
Likes
2
Downloads
0