Glass Plate Corner Brackets for Flashforge Inventor 3D Printer (Second Remix)
Description
These corner brackets were designed to interface with the Flashforge Inventor 3D printer and the glass plate upgrade from Flashforge USA. Supports glass dimension (L x W x H) 9 x 6 x 0.15 inches. Glass must be installed on top of the Flashforge build tape and aluminum build plate. They are meant to be printed using high temperature filament and they are far more stable than my prior design. The following parts need to be printed: - Inventor Glass Frame Rev 12 (FR-RL).stl (qty 2 required); and - Inventor Glass Frame Rev 12 (FL-RR).stl (qty 2 required). The following fasteners are required for proper assembly: - Qty 4 metric M3 x 0.5 x 16 mm socket head cap screws (or similar fasteners close in length) with matched nuts; and - Qty 8 metric M3 x 0.5 x 8 mm socket head cap screws (or similar fasteners close in length) with matched nuts. The corner brackets are designed to be of sufficiently low profile to accommodate the build plate movements in proximity of the internal filament spools. I would like to say that this project worked on the first attempt but it would be false. What started as a deliberate design attempt turned into a series of trial and error. It took me twelve versions to get this remix right.
Statistics
Likes
2
Downloads
0