Santa and Rudolf Automata
Description
Output all STL files in the correct number. You should not need supports. Print [Body_Santa_01 ~ 05] on One Bed. (No Rafts, Supports) To print Santa in different colors, watch the video below. https://youtu.be/_vHh7l2R7NI Assemble all. Watch the video below. https://youtu.be/sWFa8ZpHFEo ※ If screwing does not work well, reduce or enlarge female screw and print. ※ When you print small parts, you will need a rafts or brim.
Statistics
Likes
121
Downloads
0