4IN CNC 80mm spindle Vacuum Shoe - Brush holder - Elastic Connection
Description
Vacuum Shoe - 80mm Spindle CNC 80mm spindle; 65 and 52mm adapters are included! 4in vac line - flat and helix versions Brush Holder is connected to the Vacuum Shoe with 4 Elastic Connections - therefore easy to connect, easy to remove! Linear brush can be secured with M4 bolts or can be tailored. In case you have no access to a linear brush use some textile or foam/plastic material instead! Use approximate 580mm linear brush - max thickness base 7mm A BLANK version was add, in case is decided to glue the material (brush/textile/foam) to the brush holder. Build on this platforms: https://www.thingiverse.com/thing:3960822 https://www.thingiverse.com/thing:4013555 https://www.thingiverse.com/thing:3987173 https://www.thingiverse.com/thing:3978335 https://www.thingiverse.com/thing:3152659 Additional parts if required... see above! ( Fast connection and cnc 4in vac arm) If you are looking for a "fancy" version... with magnets and such... https://www.thingiverse.com/thing:3123164 If you are looking for a 2in vacuum line version... https://www.thingiverse.com/thing:4041896 If you are looking for a 2in vacuum line with a 52mm spindle version... https://www.thingiverse.com/thing:4045874 All parts are check for naked edges or errors - therefore all are going to be printable! If the design is good or if the parts are going to fit... that's another story! Design to print without support Mostly!!! :) By Costa
Statistics
Likes
3
Downloads
0