E3D Hemera front-side 5015 part cooling fan mount (semi-usable)
Description
13/12/2019 UPDATE 2: This one now works, not great, but alright enough if you're stuck without a part cooling fan and need something quick and dirty. Still trying to improve it, please leave me your feedback in the comments. ------------------------------------------------------------------------------------ 12/12/2019 UPDATE: The STL has an error where one of the duct outlets is completely blocked. And I've tested the design and the airflow is quite horrible. Please don't waste your time with this current iteration and a new one will be here by Sunday 15/12/2019 A simple Hemera fan mount designed to attach to the front side with a standard heatblock (not a volcano). Designed for a standard 5015 blower, and requires some supports to print. Untested design.. Print in PETG or ABS, you'll need some heat and creep-resistant material. HARDWARE NEEDED: You'll need 2x M3x5 bolts, 1 M3 nut, and 2x M3x20/25 bolts for this. Please make sure to test your endstops, as this takes up some major space in front of the Hemera! (Designed for a CoreXY with sensorless homing, Hemera mounted width-wise across X gantry)
Statistics
Likes
28
Downloads
0