EDC Wallet
Description
I was looking at minimalist wallets, such as the ridge wallet and the wallets made by Dango, when I realized that I could just print one. I designed this wallet to be similar to the Dango D-Series wallets, but a bit larger. You can use anything as simple as a few rubber bands to hold the wallet together. I would recommend using a silicon band, which you can find here: https://www.dangoproducts.com/collections/d-series-wallet-parts-accessories/products/wallet-band . You could also use an elastic band or anything else you would like to. I haven't tested this, but if you printed a band for the wallet out of NinjaFlex or other flexible TPU that might work too. I'll design a band for it soon and print it out of sainsmart TPU and let you know how it turns out. I would also recommend adhering something to the inside of the wallet to help prevent the cards from being scratched. In the photo above, I used medium viscosity CA glue to adhere Tyvek to the back of the wallet cover. Tyvek can be found here: https://www.amazon.com/DuPont-Tyvek-55gm-approx-A5/dp/B00MIZXJH6/ref=sr_1_26?keywords=tyvek&qid=1576370463&sr=8-26 . I hope you enjoy the wallet! Update: Sainsmart TPU didn't work for the band. It wasn't elastic enough.
Statistics
Likes
35
Downloads
0