E11 BAPTY BLASTER

Description

In addition to the files found here, you will also need some of the files found at the links below: Sterling SMG files: https://www.thingiverse.com/thing:4003566 E11 accessory files: https://www.thingiverse.com/thing:3989097 Refer to the BAPTY PDF file (found here) for details and instructions. Update (2021/06/29): Updated scope rail designs, added magazine plug. The following files were added, changed or updated: BAPTY_REV E.PDF BAP MAG PLUG.STL BAP SCP RAIL M19-2.STL BAP SCP RAIL M38-2.STL Update (2021/04/29): Updated grip assembly design. The following files were added, changed or updated: BAPTY_REV D.PDF BAP GRIP2.STL BAP GRIP FRM2.STL BAP REC MID2.STL BAP TRG GRD2.STL BAP 1PC REC2.STL BAP 2PC REC FRNT2.STL Update (2021/04/21): Updated folding stock design. The following files were added, changed or updated: BAPTY_REV C.PDF BAP FS FRM LEFT2.STL BAP FS FRM RIGHT2.STL BAP 1PC STK FRM2.STL Update (2021/04/12): Updated scope design. The following files were added, changed or updated: BAPTY_REV B.PDF E11 SCOPES.PDF Update (2020/10/13): Added optional one and two piece receiver tube. Added optional one piece stock frame. Updated drawing BAPTY,PDF Update (2020/10/09): Updated drawing BAPTY,PDF Update (2020/10/05): Deleted and re-uploaded all files. Drawing BAPTY.PDF updated. Update (2020/09/21): Added optional scope rails for mounting the scope with screws instead of using the alignment tabs on the original scope rail. The following files were added, changed or updated: BAPTY 20200921.PDF BAPTY SCP RAIL M19.STL BAPTY SCP RAIL M38.STL Update (2020/09/10): Updated hollow scope details. Update (2020/08/26): Updated the parts list with new Hengstler counter numbers. The following files were added, changed or updated: BAPTY.PDF Update (2020/08/07): Changed the angle of the magazine well 3 degrees for accuracy. Magazine well and magazine now have a REV A suffix. The following files were added, changed or updated: BAPTY.PDF BAPTY MAG CUT REV A.STL BAPTY MGWL REV A.STL Update (2020/01/03): I printed the BAPTY MAG CUT.STL file, and found that it wobbled slightly when inserted into the magazine well of the blaster. I have added a spacer to the model to fix the problem. New files: BAPTY.PDF BAPTY MAG CUT.STL Update (2019/12/26): Added 1942 M38 scope, updated BAPTY.PDF. Update (2019/12/20): Added 5/8" wooden dowel to parts list on drawing BAPTY.PDF. This is a variant of the E11 blasters used in Star Wars for the filming of the Tatooine scenes in the deserts of Tunisia. For this purpose, the Sterling SMG MK4 (L2A3) was modified (by Bapty &Co.) by removing parts or replacing them with dummy parts. Because this project uses common parts with a stock Sterling, I am only including parts that are unique to the Bapty blaster. The rest will be a bit of a scavenger hunt. Please open the BAPTY.PDF file to inventory the files needed. All parts beginning with "BAPTY" can be found on this page under the "Thing Files" tab. For files beginning with "E11ANH3", go here: https://www.thingiverse.com/thing:3989097 For files beginning with "STERLING", go here: https://www.thingiverse.com/thing:4003566

Statistics

Category

Tags