Rear Endoscope Mount for Prusa MK3S Camera
Description
This is an endoscope mount that positions an endoscope behind the extruder assembly. The mount is designed to replace the cable support piece and to screw directly to the extruder assembly. I designed it for an 8.5 mm diameter endoscope and used an 8.75mm ID so after printing it slides in smoothly. Some videos of taken by my endoscope. https://youtu.be/1jOCNYSnR3g https://youtu.be/dzvaJtSYEzg Note: Depending on the tolerance stack up on your extruder and the hardware you use, you could slightly reduce the print volume. It will also reduce your print volume if you use the spool holder included with the Prusa that attaches to the gantry. Be sure to use a countersunk screw (flat head screw) in the appropriate place. *** Update *** 03/03/2020: I realized that the original version of the things prevented the printer from calibrating the z correctly. I have changed the top screw to a flat head screw. 04/27/2020: Made a configuration for a 5.5mm endoscope (5.5mm ID) by request. 05/10/2020: Made a configuration with a 7.5 mm ID by request.
Statistics
Likes
31
Downloads
0