TTGO T5s 2.7" eInk display with 18650 Battery
Description
A case, which holds my **TTGO T5s 2.7"** eInk display. Below can be stored a **18650 battery** (_with a single battery clip holder_) and there is still space for a **433mHz** sender (_XY-FST_). It will stand on 45°, with the battery it´s hardly balanced, but it works :) The buttons are very fragile, when the lid is not mounted. So be aware of bending them (_at least if you would not like to remove them_). This case is completely new designed, but base on the model from [punkgeek](https://www.thingiverse.com/punkgeek/about). Beside the space underneath I´ve attached a little clip to make the lid hold more tight. And optimized the placement of the display cutout. My Board Version is: * T5_V2.8_2.7 * 20190710 **Update:** ~~In the STL-file, the box is upside-down. Turn it around in your preferred slicer software, to print it properly!~~ STL is now rotated! *Gcode* files for a Creality Ender 3 are included. *FCStd* files are also included. If you want to modify them, feel free and please refer on this project as a remix :) **Update2:** A little field report can be found in German on [arduino.cc/TTGO T5s](https://forum.arduino.cc/index.php?topic=657408.0) **Update3:** [New Version (without 45° stand cutout)](https://www.thingiverse.com/thing:4664052)
Statistics
Likes
1
Downloads
0