Ender 3 Pro - Shelf
Description
<h2>Extention / Addon for the **Creality - Ender 3 Pro**</h2> to have all tools, components, some filament, a adhesive spray and all stuff i need around my printer i have designed a shelf fitting under my Ender 3 Pro Printer. The Shelf The shelf is lasercutted out of 4mm MDF, after assambling the body and the 3 drawer i sanded everthing to give i a nicer look than with the burned lasercut sides. Mount the handles to the drawers with the M3x10mm bolts. Now you can but your printer on top and fill up your new storage module. If you also often carry around your printer as often is i do you can mount the shelf to the baseframe of the printer using - Spacer + Tnut + M3 nuts + M3x20mm countersunk bolts. <h2>Materials / Prints:</h2> <ul> <li>1x MDF sheet 4x600x1200mm </li> <li>8x M3 x 20mm countersunk bolts</li> <li>8x M3 nuts</li> <li>4x M3 x 10mm countersunk bolts</li> <li>4x spacer.STL</li> <li>2x handle_drawer_small.STL</li> <li>1x handle_drawer_big.STL</li> <li>8x <a href[https://www.thingiverse.com/thing:3050607>t-nut_M3_x1.STL</a></li> </ul> <h2>Facts</h2> <ul> <li>max dimension of fitting filament spools: ø200x75mm (i use <a href="https://www.3djake.at/3djake/ecopla-schwarz">3D Jake - ecoPLA</a>)</li> <li>Slot for the adhesive spray: 200x68x75mm (i use <a href="https://www.3djake.at/3djake/adheasy-spray">Adheasy Spray</a>)</li> <li>two smaller drawer on the side for the maintenance tools (Hex keys, screwdrivers,...)</li> <li>a bigger drawer in the front for the daily tools (pliers, spatula,...) or finish prints to store</li> <li>one empty slot on the rear-right to custimize</li> </ul>
Statistics
Likes
7
Downloads
0