STILL Electrocart for 1-gauge and LGB (1-32 - 1-22.5)
Description
STILL Electrocart for 1-gauge and LGB ===================================== The prototype: -------------- These electrocarts where used widely from the late 1950s until the 1990s for transporting luggage, post and parcels on railway-stations in Germany. Italy, and the Benelux-countries. The manufacturer also exported some vehicles to Japan. Some examples were also used in the industry. The model: ---------- The model is drawn for 1-gauge (1/32). The pictures shows a model printed in 1/32. For LGB it can be printed enlarged with factor 1.5. This will give a scale of 1/21.3 but can be used with 3mm axles. If the model is printed with another scale-factor the axles and rims must be drilled according to the size of the axles. Additional needed parts: ------------------------ - 2mm metal axles (3mm for LGB – size) How to print: ------------- The model is printed in usual PLA. The tires are printed in TPU. All parts are printed with support “touch build plate only”. The front-axle is printed lying flat, the rear-axle upside-down with the springs on the build plate. How to assemble: ---------------- The handrails beside the seats should be glued to the chassis. Note that the rims for the front- and rear axle are different. ### Front-axle: The front axle should be inserted turned 45° to side. It self-locks in horizontal position.
Statistics
Likes
71
Downloads
0