Thermistor Mount Redux
Description
This is version 2 of my thermistor mounting solution, designed for those wanting to monitor enclosure temps with a spare E3D-style cartridge thermistor. It's intended to mount to V slot extrusions using M3 screws and a single M3 hammer nut. After I accidentally melted the print I made of my original design, I decided to re-make the mount from the ground up. This version is intended to be easier to print as it lays flat and has far fewer overhangs. That also means it requires far less supports, and in turn it takes less time and less filament to print. Hardware M3 Nuts and Bolts: https://amzn.to/36YkUq7 E3D Cartridge Thermistor: https://amzn.to/34IVpYw Chinesuim Thermistor: https://amzn.to/35Mrosb Hammer Nuts: https://amzn.to/2EJTPek If you use a different sized thermistor than the 3mm cartridges v6 style blocks use, I'd be happy to edit the files and include other sizes if need be. I've also included the STEP files of the design so that you may edit it as needed. If this design has proven useful, feel free to buy me a drink by leaving a Tip!
Statistics
Likes
1
Downloads
0