Heatbed minimalistic adjustment wheel M4
Description
This is a simple thin design of heatbed adjustment wheel. Thin and provides a solid grip. Settings for the print: Nozzle temp. 215°C Heatbed temp. 65°C Resolution 0.2mm Infill Grid 90% No supports Speed of 40mm/s ABOVE SETTINGS AREN'T FIXED! INFILL SHOULDN'T BE BELOW 80% FOR BEST QUALITY When done printing, clean the hole, scrape if there's any extra material and insert an M4 hex nut, you will need to hit it a little to sit in the place properly. I hope it'll serve useful, enjoy!
Statistics
Likes
6
Downloads
0