Marine Boat - Inspection Hatch 220mm
Description
Marine Boat - Inspection Hatch 220mm UNTESTED If you print this project, and you are happy with the final part, do not forget to buy me a roll of filament, or at least few meters - in order for me to be able continue to test and improve these projects or to design new ones! If you are not happy with this design or you have problem with your printed parts - send me a message, we will try to fix it together! :) If you do not want or you can't afford to buy me a roll of filament ... its ok, I still hope you enjoy printing my designs! Pace! Update : New Grill Cover Set Two versions of covers, for deck ( with anti slip grid) and wall (flat surface); each one with three strength types. It comes with three gasket versions, with compression of 2, 1.5 and 1.0mm . Print the gaskets using TPU filament. Keep in mind that the gasket have a trapezoidal section, and it will required to be press fit to position! If you have problems printing TPU see my Cura settings for some TPU printed parts: https://www.thingiverse.com/thing:3812899 ...however, in the sample mention above I use a FLOW of 130%. Those gaskets needs to be somehow elastic, and not so stiff! I recommend to use a flexible filament... and a flow of 100%! If anyone know better settings for our situation here... welcome to share the info! It use M6 countersunk bolts - 8 units. All parts are check for naked edges or errors - therefore ... all are going to be printable! If the design is good or if the parts are going to fit... that's another story! Design to print with support... :( By Costa
Statistics
Likes
29
Downloads
0