Pop Socket Belt Clip
Description
This is a simple belt clip with a pop socket mount on it. The mount works with both common sizes of pop socket that are available in the US (at least in California) and will probably work with any similar mount. This requires a bit of glue for assembly due to it being impractical to print as a single unit. (I recommend gorilla or tacky glue, hot glue doesn't support the weight of my phone but YMMV) The connection point between the two pieces is intentionally tight for glue-bonding purposes, so you may want to dial down your extrusion factor or scale it to 95% if you're using cheap filament or a large-diameter extruder. Update 12/25: Added a version with a 4mm hole. Use this version with a M3x30mm or M4x30mm nut/bolt for the strongest and most reliable connection. I'd really suggest going for PETG over PLA for this print as the clip needs to be able to flex and could possibly snap due to brittleness during usage.
Statistics
Likes
5
Downloads
0