Proton Pack Cyclotron
Description
Update 2/12/17. This Part Was Used In The Ghostbusters Station 6 Fan Film. Check It Out On Youtube At Https://Www.Youtube.Com/Watch?V=Rhmusqqlmrg Re:Update 4/12/15 New Mount Will Need Holes For Self Tappers To Be Drilled Into The Bottom Of The Cylo. I Will Make Changes To Fix This Soon. Update 4/12/15: New Cyclo Mount Added. This Is An Improved, Single Mount Over The 4 Separate Ones Previously And Aligns With The Holes In: Https://Www.Thingiverse.Com/Thing:1093376 I Need To Update The Cyclo Bases To Match The Holes In The Mount, Or In The Meantime, Use A 2.5Mm Drill With The Mount Against The Base Of The Cyclotron As A Drill Template. A Full Size, 3D Printable Version Of The Ghostbusters' Proton Pack Cyclotron Based On Steffan Otto'S Plans At: Http://Www.Gbfans.Com/Wiki/Stefan_Otto%27S_Prop_Plans Print Two Copies Of Cytopwide.Stl Print Two Copies Of Cytopnarrow.Stl Print Two Copies Of Cybottomwide.Stl Print Two Copies Of Cybottomnarrow.Stl Print Four Copies Of Cydisk.Stl Optionally Print 4 Copies Of Leddiffuser.Stl In Clear Pla. This Fits A 5Mm Led. Join Bottom Parts Together Using M4 Nuts And Bolts. Push Cydisks Through Cytop Holes, Then Fasten To Cybottom From Underneath With 5/8"X#3 Self Tap Screws. Print Drill.Pdf Onto A3 Paper At 'Actual Size' For The Drill Centres For Holes. Print 1X Cybottomnarrow.Stl And 1Xcyclo-Nfilter If You Plan To Use My N-Filter At: Http://Www.Thingiverse.Com/Thing:543816 Update 20/11/2014: Added Pillars To Allow The Cyclo Disk To Fasten Directly To The Motherboard. See Cad Rendering For Details.
Statistics
Likes
63
Downloads
0