Christmastree - luminous
Description
I want a Christmas tree that I can light up. This is how I constructed parts that can be illuminated indirectly with transparent parts or with 5 mm LED through holes. The tree in the pictures shows a direct light downwards in the upper 3 parts, the lower part is transparent with internal LEDs. I used RGB rainbow LEDs with resistors on the 5V USB cable. Drill out the holes in the green parts with a 2mm drill so that the filament pieces can be used for centering. In the counterparts I melted the filament pieces with a soldering iron. Hint: ONLY the top needs support - but only in the outer area!!! use support blocker The part green4 has a plate for better adhesion, which must be removed after printing. https://youtu.be/gg8PHhlzpME
Statistics
Likes
10
Downloads
0