120mm Solder Fume Extractor
Description
This is a four-piece solder fume extractor. The design is fairly forgiving when print at 0.15mm. All pieces snap in place but will need glue. You will need: * 4x M4 hex nuts * 4x M4 30mm or 35mm machine screws * Glue, preferably E6000 * 1x [Toggle switch](https://www.amazon.com/gp/product/B012MYRB4E) * 1x [2.1mm ID/5.5mm OD barrel connector](https://www.digikey.com/product-detail/en/cui-devices/PJ-006A/CP-006A-ND/269296) * 1x 3-pin fan extension header or Molex adaptor (all you really need is the 3-pin header for the fan), [example here](https://www.amazon.com/3-Pin-Fan-Extension-Cable-12/dp/B006MX4B3Q) though I used an adapter found in my closet. * A soldering iron * Standard 130x130mm activated carbon filters
Statistics
Likes
3
Downloads
0