Spring-loaded track tensioner
Description
** Yamaha or Arctic Cat Spring Track Skid Parts ** ** UPDATE : ** * March 2nd 2020> Made a Arctic Cat M8000 version ** Infos : ** - Springs are RC4WD internal springs. Z-S1183 - - Dimensions: 5.5~6.5mm_diameter 35~40mm_length - The promod_rear_sprocket_bearing_v2.stl file is optional but recommended, else the tension will chew through the wheels very fast. - **Bearings are flanged 3x10x4.** - Make sure you file/sand the "pushrod" so it can slide freely in the rail's channels. - Don't overtighten the sprocket screws as it will lock up the tensioner. - Use 1 small washer on each side between the rails and sprockets for added slippyness. - Added bonus of having some flex when you jump and land on the tip of the skid!
Statistics
Likes
9
Downloads
0