V2 CR-10 hanging fan/part cooler compact edition for stock and Microswiss hotends
Description
Version 2 of : https://www.thingiverse.com/thing:3312490 Uses 2 30x10mm fans, Sunon high static pressure fan recommended https://www.digikey.ca/product-detail/en/sunon-fans/MF30101V1-1000U-G99/259-2046-ND/9950100 Requires M3 3x4.3mm brass inserts for secure mounting. https://www.amazon.ca/gp/product/B01IYWTCWW/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Only 2 pieces to to print to get you going, the bracket and one of the 5 duct options: 1) No ABL 2) With BLTouch mount 3) With 12mm diameter sensor mount (e.g. inductive, EZABL, etc.) 4) With 18mm diameter sensor mount (e.g. inductive, EZABL, etc.) 5) With J-Touch mount : https://www.thingiverse.com/thing:4071293 Use your slicer's mirror function for 2, 3 and 4 above if you want to mount the sensor on the right side Printing suggestions: 1) ABS or PETG recommended 2) Use CURA: tree support and support blockers X/Y Sensor Offsets: BLTouch 30/10mm ABL 12mm 33/10 ABL 18MM 35/10 J-Touch 29/10mm
Statistics
Likes
21
Downloads
0