Aquarium Filter / Media Reactor v2
Description
DIY aquarium filter, media reactor, bioreactor - 3D-printable - no supports - watertight without caulking - minimal assembly - disassembles for cleaning ### Version 2 Updates - Changed from 4 to 6 flange screws for better sealing - Changed to a wider o-ring - Added reinforcement to the upper plate - Tested in PLA with epoxy bonding ### Reactor Parts - 6 - ABS 3D-printed pieces - 1 - [3" clear polycarbonate tube](https://www.mcmaster.com/8585K42) - 4 - M3 x 20mm socket-head screws - 4 - M3 nuts - 1 - [3" soft rubber o-ring](https://www.mcmaster.com/2418t228) - 6-12" of 0.5" [ABS tube](https://www.mcmaster.com/1839T371) - 0.5" [soft silicone tubing](https://www.mcmaster.com/5236K452) - [snap-grip nylon hose clamps](https://www.amzn.com/B07VTMQHW9/) ### Supplies - [acrylic cement](https://www.amzn.com/B003HNFLMY/) to bond ABS and polycarbonate parts - [clear epoxy](https://www.lowes.com/pd/Gorilla-Epoxy-Clear-Epoxy-Adhesive/3776015) to bond PLA and polycarbonate parts - [applicator syringe](https://www.amzn.com/B01HFTYINS/)
Statistics
Likes
185
Downloads
0