Wheels for P-38 from 3dlabprint
Description
Wheels for P-38 from 3dlabprints. Main wheel - 70mm in diameter. Front wheel - 50mm in diameter. Print settings: Rims - printed from PETG. Layer height - 0,2 mm Outlines/perimeters - 1 Top/bottom layers - 4 Important - option for allowing single extrusion walls must be enabled in the advanced tab (Simplyfy3D) Tyres - printed from TPU Layer height - 0,1mm Outlines/perimeters - 3 Top/bottom layer - 10 To keep the weight down, I used a variable infill percentage: main is 5%, but for top 2mm it's 30% You will also need a piece of brass tube with an outer diameter of 4mm and an inner diameter of 3.2mm (as a bushing). My other designs for 3dlabpint p-38: Spinners: https://www.thingiverse.com/thing:4078812 Motor mount: https://www.thingiverse.com/thing:4078761 ESC mount: https://www.thingiverse.com/thing:4175154 Pushrod clips: https://www.thingiverse.com/thing:4175134
Statistics
Likes
11
Downloads
0