Ender 3 (Pro) Spring Guides
Description
*Update* - 02/01/2020 - The spring guide for the cable mount is now compatible with the cable chain mount from https://www.thingiverse.com/thing:2920060 *Initial upload* - 01/01/2020 **Note that these guides are designed for springs with an outer diameter of 8mm.** ### Why? The original compression springs on my Ender 3 Pro print bed mount were buckling. To ensure that the springs stay in shape while being compressed I made these guides. ### What does it do? You should end up leveling your bed less often with these. ### Files included: - Top part - Bottom part - Shorter bottom part for the original cable mount / cable chain mount ### Optional hardware: - 4x nut M4 - 8x washer for M4 ### What to print: - 4x Top guide - 3x Bottom guide - 1x Bottom guide for the original cable mount * Note that if you don't want the thread on the upper guide just print the lower guide 7 times (+1 for the cable mount) instead.* ### Your feedback: Anything you would change? Just let me know.
Statistics
Likes
1721
Downloads
0