Bitcoin two face
Description
This has been fully remodeled inspired by karilawler version. The changes include: - Simpler polygons geometry in termos of the 'B' and groves around it resulting on faster prints. - 3.5mm thickness with 0.8mm groves - 40mm diameter - 2 sided The result shown in the pictures are using the following settings in Cura 4.4: - Layer Height: 0.2mm - Line Width: 0.4mm - Wall Thickness: 1.2mm - Wall Line Count: 3 - Bottom Layers: 9999 - Infill 100% - Print Speed: 60 mm/s - Wall Speed: 45mm/s - Top/Bottom Speed: 25mm/s - Initial Layer Speed: 15mm/s I used an override between layer 6 and 12 to speed up the filling part of linear layers: - Outer Wall Speed: 45mm/s - Inner Wall Speed: 55mm/s - Top/Bottom Speed: 70mm/s These settings result on my printer 28mins for a single coin, around 2h30 for 6 coins and Cura predicts it will take around 6h for 15 coins.
Statistics
Likes
4
Downloads
0