VAULT-TEC CASE
Description
Okay, I have printed the box and everything works as intended. The print time was 37 hours in total on fast under my settings. I am going to print one on high next since everything works. This box is solid and the latches work a little too good. I imagine that they will lossen over time. This is the final version and I will be working on the larger version now. I designed it to be functional. ***Thank you carlctz1978 for finding the problem with the hinge and logo down print.*** The model is meant to be printed hinge down. This is a bit wasteful and adds considerable time to the print. I have added a smooth top with a stencil for printing hinge up. The stencil should work on the smooth top and top with logo. This is a large print. I highly recommend a back up power battery. Use an 11/32 or 9mm drill bit to open up the hinge holes and a 5/16 drill for the latch holes. *** Anyone that downloaded this before 1-5-2020 should re-download the top and bottom. The hinge pins, latch pins, and latches should still be good.***
Statistics
Likes
47
Downloads
0