small box case for TTGO VGA32
Description
small box case for LILYGO TTGO VGA32 V1.2 CAD files; TTVG32_133.stp [STEP format] STL files; TTVG32_133_top.stl TTVG32_133_btm1.stl TTVG32_133_btm2.stl -requirement LILYGO TTGO VGA32 V1.2 http://www.lilygo.cn/claprod_view.aspx?Id=1217 Bolt and Nut M3 12mm Bolt and Nut x4 pairs ----- -About the built-in small speaker, LIPO battery and 4pin header. The TTGO VGA32 has a little space between the PS2 keyboard / mouse connector and the VGA connector. It may have to install small speakers or small LIPO batteries. And a switch should be added as to whether to use it. "TTVG32_133_btm2.stl" provides a place to mount a small universal board and holes for the switch. Also, on the board of TTGO ESP32, 4 holes for drawing out 4 signal lines marked [3V3 IO12 IO2 GND] are arranged at 2mm pitch. If a header that can connect a 4-pin connector like the one used in the GROVE device is installed there, it may be convenient for various experiments etc. What you need for this are, for example, the following parts: universal board (16.5mmx19.2mm) mini slide switch mini Speaker(If it is about 35x16x5mm or smaller it could be installed.) (Please refer to the specifications of NS4150 mounted on TTGO VGA32V1.2 for the speaker to be selected) small LiPo batt. (It could be installed if it is "602535" size or smaller.) box header 4pin(2mm pitch -A connector for a GROVE device may be suitable) ----- Please refer to the photos for how to assemble.
Statistics
Likes
5
Downloads
0