RD6006 Complete Case for small Printer & Mains PSU
Description
Edit @April 16th 2021 - Added left part with 30mm additional space inside. This is my complete Case for the RD6006. Designed with small printers like my i3-Mega, for silence and good airflow in mind :) Biggest Part (right side) is 130x150x180mm It's designed to be used with the usual Chinesium Mains-Power-Supplies you'll find in every corner (e.g. https://www.amazon.de/dp/B077CK2HJF/) It consists of two parts which should be printed from the left/right side up (see screenshot). I recommend to use 2mm walls and/or 100% infill, support is not needed. Holes for the following additional parts are added: - IEC socket (c14) - Real Power-Switch (Double-Throw, ~22,4 x 19mm) - 80x80mm Fan After printing just put everything in it's place, do the cabling, secure the psu with short M-Screws (M4 imho) from below, close the case with four screws for wood or plastics and put some rubber-feet on. PS: I connected the PSUs and 80mm-Fan in series, both are turning fine and silent. Only copy if you know what you're doing ;) Enjoy :)
Statistics
Likes
45
Downloads
0