.22lr Tube loader 15 rounds
Description
I was about to buy one... but they reviews were not quite favorable due to some quality issues. So I designed my own, very stable, using minimal filament. Print all 3 body parts, print two of the swivels and then use two M3 screws and nuts to attach swivels to both caps. Then connect them together though the middle with a extension spring from a hardware store. Use a cotter pin plug the funnel when you don't wan the rounds to fall out. ENJOY! ***IMPORTANT*** The body needs to be flipped (the solid circle is for the print bed). I added a very thin solid base to help with adhesion that will need to be removed after printing.
Statistics
Likes
17
Downloads
0