SEAT logo with magnet.
Description
Seat logo designed as a logo for a fridge or a car. For this project i use 6 pcs of neodymium magnets ( ø 10 [mm], thick 1 [mm]). Magnets are glued to model using a cyanoacryle glue. Additional info: Print temp: 210 [°C], Bed temp: 48 [°C], Bed: glass&paper glue for adhesion help, Filament change should occur at 2 [mm], Infill: Gyroid, Support: Grid
Statistics
Likes
5
Downloads
0