UMX Radian Screw elimination with magnets
Description
If you have a UMX Radian, you know you need to screw in two very tiny screws into the wing through the fuselage. Usually this is done at the field so transportation is easier in the box it came in. Well, no more screws. This mod uses 4 5x5x2mm Neodymium magnets. Be careful to pre-align and test fit before gluing the magnets in to the printed parts. No need to glue in the printed part to the airplane, just use tape. You will need a new sharp x-acto knife or equivalent to lightly score the foam to get a flush fit. See my YouTube Video: https://youtu.be/i21RUBwOH5M I got the idea from this YouTube Video: https://www.youtube.com/watch?v=XOJxA4h1G1g Thank you fishycomics for the idea!
Statistics
Likes
3
Downloads
0