Babytooth by GlitchFPV feat. FPVFrame.ch
Description
The Babytooth is a top mounted 65mm/3" frame made for epic freestyle sessions! The top mounted lipo sets the total cog closer to the propeller’s plane which is optimal for the flying characteristics of an fpv quad. As an exception, it this not our own design. The original frame has been drafted by Ottar Opland who kindly allowed us to do some modifications and distribute his awesome design! Its based on his open source files. Key features: 120mm TrueX diagonal weight: ca 16g including hardware and camera mount distance between centerplates: 11mm TPU battery mount 25.4×25.4mm flight controllers only (or use adapter) TPU canopy for nano cameras or aio (cam+vtx) USB cutout for downwards facing USB ports The DXF files are meant to bet cut in 1.5mm (topplate), 2mm (bottomplate+arm) and 2.5mm (arm_3inch). The Topplate is made to hold 5*M2 pressnuts in place (4.35mm pressfit diameter). If you want to use self-locking nuts instead, adapt the hole diameter to 2.1mm for M2.
Statistics
Likes
9
Downloads
0