Adapter for one-handed clamp (Wolfcraft EHZ 65-150) for hole grid workbench (20mm)
Description
Adapter for one-handed clamp (Wolfcraft EHZ 65-150) for hole grid workbench with 20mm holes. Both parts has to be printed. No support is needed. Building instructions: 1. Remove the upper chuck from the clamp 2. Put the printed main part onto the clamp and center the hole/bore of the printed part and the hole/bore in the clamp. 3. Insert the second printed cylinder part into the hole/bore. 4. Insert a M4x15mm screw with hexagon/allen screw, a washer and a M4 nut. 5. Short the screw to fit inside the 20mm hole.
Statistics
Likes
57
Downloads
0