
Zimpure Suction Head for CR-10s Pro
Description
I've got a modified CR-10s Pro with a Microswiss AllMetal Hotend and a BLTouch Sensor. I bought a Zimpure Filter System to combat UFP and VOC emission. I was in need of a suction head since none was available for the cr10spro from the seller, so ive made this. I dont know if it fits with the stock sensor and hotend, if it does please leave a comment and i'll add it into this summary. I've printed it in 0.12mm Layer Height but 0.2mm should be more then sufficent. Because of the narrow space i had between sensor and hotend, the walls are only .75mm thick. Perhaps i'll redesign it in the future but for now it works perfectly. It'll get cooled by the heatbreak fan and the running particle filter but better print it in a high temperature stable plastic, since the suction head is located next to the extruder's heating block.
Statistics
Likes
5
Downloads
0