AIR HEAT EXCHANGER metal sheet partition wall 32 or 64/200X200/0.2mm
Description
HEAT EXCHANGER - metal sheet partition wall - 32 or 64/200X200/0.2mm It use 32 or 64 metal Sheet Plates - 200mm X 200mm X 0.2mm. I strongly recommend using ST ST plate, however, Galvanized steel ... will do ... as in "poor-man" version! It comes with two partition versions : 1 and 2mm thickness. Partition was design for 0.2mm metal sheet; are required 32 or 64 units. If you do not have access to a laser - for cutting the sheet plates, use the B versions (vers. without middle bolts); or use version C (half flow rates), or D (partition design for double flow rates - with 32 sheet plates) with M5 mid. bolts. M14 hex - 1300mm - 4 units M6 Countersunk - 85 - 90mm - 4 units vers B M5 Countersunk - 85 - 90mm - 4 units vers C & D M4 Countersunk - 14mm - 32 units Additional, see the HEPA filter adapter: https://www.thingiverse.com/thing:4092032 All parts are check for naked edges or errors - therefore ... all are going to be printable! If the design is good or if the parts are going to fit... that's another story! Design to print without support ... mostly... except for the parts what need support :) By Costa
Statistics
Likes
7
Downloads
0