Tukey Case
Description
This is a case for the [Keebio Tukey](https://keeb.io/collections/frontpage/products/tukey-1x2-big-switch-macropad), a 1x2 macropad PCB for [NovelKeys x Kailh Big Switches](https://novelkeys.xyz/collections/switches/products/the-big-switch-series). I initially soldered my Big Switches to my Tukey and propped it up on some standoffs. While bare-bones and not terribly pretty, this worked well for a while. But the switches are plate mount, not PCB mount, and my relatively light use started breaking the solder joints after a few weeks. I decided to re-work this project from the ground up and model a proper case, taking the opportunity to add RGB LEDs in the process. The bottom plate is optional. Everything holds together fine without it, but it's a nice bit of fit and finish.
Statistics
Likes
10
Downloads
0