Ender 3 Power Supply 92mm Fan Case
Description
## Description This is a remix of [OderWats WellFan Mean Well PSU Mod](https://www.thingiverse.com/thing:2967389) that is adapted for the standard Ender 3 PSU. Changes to the design were done in order for it to fit the mounting holes of the PSU and accommodate a larger, 92mm fan. I personally used a [SUNON 92mm](https://www.tme.eu/en/details/mf92252v3-a99-a/dc24v-fans/sunon/mf92252v3-1000u-a99/) that is 24V and can be easily swapped instead of the original fan, without the need of a buck converter. If any adjustments need to be done you can comment on this thing and I'll do my best to help asap. ## Updates 02.08.2020 added a more visually pleasing honeycomb pattern for the fan as well as the intake aligned elements and added a chamfer for the fan screws to fit better ## Sidenote The version pictured above is the older design, which had the fan mounted using two M3 screws+nuts, the upper two being a PITA to get in, hence why they are missing. The current design features larger, 5mm holes, that should allow you to use standard fan screws that thread into the fan itself. The two pairs of posts inside of the bottom part should be able to house two LM2596 buck converters, but I didnt check for any clearance issues yet; proceed with caution at your own risk if you do try to make use of these mounts. Thank you!
Statistics
Likes
36
Downloads
0