Raspberry Pi Media Center V2
Description
Update 01/09/2020 Added a top with vents so now you have the option. Bottom: .:HDD:. - Brought in one side of the HDD stand and shrunk it down a very little so wires can run better from the led to the gpio board. - Moved the stands closer to the right for more space on the left side of the case. .:RPi:. - Increased the pole size of the stands on the port side so the RPi snaps in and sits better. ================================================================ Version 2 of my Raspberry Pi Media Center case (https://www.thingiverse.com/thing:3374290). I have been learning to use Fusion 360 for some time now and I think I'm getting the hang of it. The pictures of the printed bottom half are from an older version before I made changes to the one uploaded. Case is 140mm x 140mm so it'll fit on a lot of beds. Print time for the bottom half was almost 6hrs. for me on standard settings. The LED in the front has a 5mm hole so you can program that yourself as a status light or slide in an IR receiver instead. The HDD needs to be screwed in first before you slide the RPI in. The ethernet port needs to be desoldered and relocated to the back as you can see in the one image. The USB port is up to you. Keeping it tagged as a WiP for now until I don't see anything else to update or fix.
Statistics
Likes
20
Downloads
0