Hapstone V7 Vertical Rod Mount
Description
This is a vertical Rod mount for the Hapstone V7 knife sharpener. Install the mount on your Hapstone V7. There are 2 holes in the middle area of the V7 platform that is used for this purpose. This is to move your V7 square vertical rod closer to the front of the sharpener to enable higher sharpening angles, or to be used with the optional rotating clamp system. Parts: 3 x M4 brass threaded inserts to be melted into the 3 holes of the mount. 3 x M4 screws. (Optionally, 2 screws and 1 thumb screw) Note: The V7 version might work on the Hapstone V5 and V6, I have not tested them for those 2 models so please let me know if it works for them also. If you find my designs useful, please go ahead and click on "Tip Designer" to the right of the photos at the top of this page. Proceeds will be used to purchase printing filament so I can keep designing and testing cool new things that you might find useful. Thank you! NOTES: Brass Threaded Inserts Example: https://www.amazon.com/dp/B07MWBJB67/ref=cm_sw_em_r_mt_dp_U_Ho0bEbPPA9P23 Some of my other useful designs: https://www.thingiverse.com/leadingedge/designs
Statistics
Likes
11
Downloads
0