Drag Chain Catcher
Description
In the process of building my CNC Router, needed catch trays for my Drag Chains, This is the result. As you can see from the pictures, you will also need some hardware. 3/4" x 3/4" aluminum angle (I used 3 foot, but you can make it as long as you want if you add more brackets). M5 screws (I used 8mm for locking them together, and 12-15mm for mounting to my CNC) t-Nuts 5MM I.D. washers 2020-01-11 Added G-code sliced on the Prusa Slicer
Statistics
Likes
6
Downloads
0