Swiss knife keychain
Description
Swiss knife styled keychain. With this design you will need two bolts (M5x20mm), two nuts (M5), and several washers (D5) and toric joints (D5). Those last are optional, but they meke it easier to move the keys. Once printed, take the botton part (With hexagonal holes), and introduce in them the nuts. Then, take the oher part and insert the bolts in the holes. If necesary, heat a little bit the bolts, son you can adjust them in the plastic parts. Introduce the keys and separate them with the toric joints. Fill the rest of the bolt with washers. Finally, with a screwdriver, join both parts.
Statistics
Likes
7
Downloads
0