Best DIY Led grow light fully 3dprinted for $30
Description
For mor info chekout my [blog entry](https://nkmakes.github.io/projects/diy-led-grow-light/) Led light made of Bridgleux BXEB L0280 led light bars, Made to fit 4x bars and a apc-35-1050 or lpc-35-1400 driver, at 20W or 30W, drived in paralel at max 350mA each. At 350mA these led strips dont need any dissipation and deliver with both drivers aroud 160 lm/w, perfect as first light for any indoor edibles. Total cost is Around 30$ incluiding everything, at time of write at arrow shop driver is 13$ and each bar 3.7$, also are needed around 30 m3 screw and nuts, and two 5x wago connectors, some AC cable plug and thick cable for connections to the bars. Size of each piece is 7.2 mm to be printable in any printer and made to fit 200mmx200mm printers, probably could be printed thinner, for that just scale that axis. All four sides are the same so you need to print: -For apc driver: 4x side 1x apc 2x Wago_apc -For LPC driver 4x Side 1x LPC 1x Wago_LPC LPC version has not been tested so if somebody can test it i could modify the STL, also if somebody wants original files i can provide them.
Statistics
Likes
26
Downloads
0