FPV Quadcopter Hanging Gate and Stand - 3 Sizes
Description
A hanging or standing gate for quadcopter practice or racing. I designed the gates to be durable and print quickly. I plan on refining this design some more, so check back later. 3 different ID's: 160mm, 195mm, and 232mm. Each size has a corresponding holder scaled for gate stability. Minimal support is required for the holder, support is really only needed near the top. You can get aggressive with cleaning of the supports. I would recommend printing the gates to at least 80% infill for good durability. The stand is thick enough to be printed at low infills, around 20%. Increase the stand infill % if you want a little inertial stability.
Statistics
Likes
7
Downloads
0