Nissan 200SX S13 Cabin air filter holder
Description
I am happy to share my cabin air filter holder project for Nissan S13 (LHD). This model doesn't have OEM filter. This design is relatively easy to install, you need to remove only the windshield glass cowl. There is not so much space but its enough to install insert and holder part separately. The parts are connected with neodymium magnets. To remove easily please add some keyring to the filter holder part, there is a little hook for it. Part list: 4x screws M3x10mm 24x neodymium magnets 6x3mm 4x heat-set threaded inserts M3 1x filter 9678792080 (check description) 1x foam tape around 50cm length and 1-2mm thick The filter is coming from Citroen/Peugeot with OEM number 9678792080, there are 2 filters in a pack. You need to cut the filter length by 18.8mm. Foam tape is needed to heater insert part for sealing. If you like the design and you want to support my work and my S13 build please visit my Patreon page : https://www.patreon.com/T3S there you can get the full cabin air filter set as a benefit for subscribing to Huge S13 fan tier!
Statistics
Likes
31
Downloads
0