sledgthunder cylinder bore-v2
Description
this is a revision of the version 2 of my barrel allowing you to fire any shell from the spring thunder series including with the double elite Nerf shot and the 3 shot pleshette boomco darts V2 is finally out I added a gasket o-ring for better seal I like all things universal and I really like the spring thunder and since I'm working on the crazy mod for the Sledgefire that allows it to have a removable barrel by a pin I decided to make a couple custom barrels for it so this is my first attempt at making a custom barrel for the Sledgefire I'm working on it right now but I don't have any way of making it prim-Abdul so it's only works with HPA systems fill freed the modify it and see if you can get it to work with the priming bar but I don't think it have enough pressure the shelves might need to have a little more pressure I do plan on modifying it a little bit more but for now feel free to give me feedback let me know what you think You will need a boring that is 36mm x 42mm x 3mm You also need a 1\2 inch drill bit to drill out the hole that the pin slides through for the sledgefire I made it smaller than it needs to be where the drill bit goes through perfectly and leaves a smooth surface this makes it easier for the barrel to slide over the pain without binding
Statistics
Likes
19
Downloads
0