Sturmkind DR!FT Parts
Description
EDIT: Added "Drift Front No Lip" which removes the front lip, keeping it in the style of the original by Sturmkind. EDIT 2: Added both Front Axle parts that are the front suspension on the D1 Racer. These are my parts that I made on Fusion 360 for the Sturmkind DR!FT Racer. All parts were designed and printed by me (except for the spoiler on the yellow car, which was made by Motivkieker with the name DR!FT Spoiler No.2). The diffuser needs some more details, I'm not quite satisfied with it, but it might be a while until I know what to do with it. Supports on the Front part only need to be in the front center, not on the sides. The Diffuser only need supports underneath the screw holes (1 front and 2 back) and the back corners. I printed the Ducktail with supports "everywhere" and with the back part facing the build plate. The wheels don't need supports but should be printed with a brim. (The wheels were designed to be printed with a 0.25 mm nozzle so the center holes might not fit when printed with a 0.4 mm nozzle.) If you have any questions or requests, I check my Instagram more often (@photosbymclobe) and I also posted this in the "DR!FT Community" Facebook group so you can message me on either.
Statistics
Likes
36
Downloads
0