HG P407 rear shock mount adapters

HG P407 rear shock mount adapters

Description

A set of coil-over shock adapters for the HG P407. The STL files are set up for shocks that are 90mm eye-to-eye and 15mm in diameter. The OpenSCAD files allow you to customize these measurements for your particular setup. Hardware needed for each side: - 2x M3x12mm machine screws - 1x M3x20mm machine screw - 3x M3 hex nuts Since you're probably mounting a shock on both sides of the truck, double the above counts. Installation steps are provided in the photos.

Statistics

Likes

0

Downloads

0

Category

R/C Vehicles