Bed leveling for nozzle 0.4 - Geeetech A10
Description
Well this is my personal bed leveling... I have a Geeetech A10 so it's sized for a 220x220 bed. And I mainly use a 0.4 nozzle so the wall is have 0.4 of thickness. My first layer is at 0.3 --> the heigh of the wall is 0.3 I had a skirt of 3 lines and often I stop the printing after 1min maximum because the leveling is ok. I upload my gcode with my skirt lines (travel speed 40mm/s, wall speed 20mm/s, hotend 200°, bed 60°, first layer 0.3) . Have a nice leveling!
Statistics
Likes
17
Downloads
0