Minelab Equinox 600 800 Telenox Detachable Control Unit Mount
Description
Hi, This is the Telenox version of my Equinox Mount. I am the original designer of the Equinox Mount. I have been selling them for a while but have now decided to share with everyone as those that live in other countries the shipping cost was very expensive. I am located in Australia. If you still want me to make one for you then feel free to contact me here or via Facebook. https://www.facebook.com/GrantNoxMount/?modal=admin_todo_tour Please have the decency to not make and sell these on eBay or Facebook etc. You will need the following stainless Hardware as well as the original bolts. 2 x M3 x 30mm bolts with round head for the hinge. 1 x M5 x 25mm Hex Head Bolt and Nut. I have also put up the standard version and a folding prototype I made. I made them with PETG at .30mm layer height as PETG has excellent layer adhesion and heat resistance. I do not use any supports.
Statistics
Likes
20
Downloads
0